Featured Fitment: BMW Z4 M Coupe with RSV Forged S|1 RS7M Wheels

Getting that widebody stance.
The BMW Z4 M was a sleek and powerful driver-oriented coupe that was more than ready to weave through winding roads. The team at Slek Designs had bigger things in mind for this 2006 BMW Z4 M. The California-based company added on a supercharger, widebody kit, racing modifications, and a set of slick RSV Forged S|1 RS7M wheels.
One of the first things that was attended to was the 3.2-liter inline-six cylinder engine. A new VF Engineering supercharger kit using a Vortech V3-Si supercharger with 8.5-9.0 PSI bumped up power to a whopping 570 horsepower and 380 lb-ft. of torque. All that power is clearly audible through the new Magnaflow exhaust system as it belts out a thrilling note.
Visually, the BMW Z4 M Coupe by Slek Designs grabs attention with its new full carbon fiber body kit. The kit has a commanding presence thanks to its new front bumper and extended fenders, lightweight hood and roof, doors, side skirts, rear hatch, bumper, and fenders. Everything is covered with a fresh coat of Deltron 4000 clear coat to show off its lightweight construction.

Filling in those newly extended fenders are a set of new RSV Forged S|1 RS7M wheels. The gold-finished wheels add depth to the fenders and contrast the dark, carbon fiber body work. Up front, the RSV Forged S|1 RS7M wheels measure a large 10.5 x 19 while the rear staggers in with a pair of massive 13.0 x 19 setup. These are wrapped up in new 275/30 R19 and 345/30 R19 Nitto Invo tires, to ensure that grip can be achieved with the big bump in power.
Behind those RSV Forged S|1 RS7M wheels sit a Ksport eight-piston, 400 mm drilled and slotted big brake kit up front while the rear axle boasts a pair of four-piston calipers and 380 mm drilled and slotted rotors. Stainless steel braided brake lines ensure maximum performance and weave around the new Ksport Kontrol Pro coilovers that sharpen up handling with razor-like accuracy.

The sport-focused attitude of the Slek Designs BMW Z4 M Coupe continues to the interior. Here, a pair of Status Racing FIA-compliant carbon fiber seats hold driver and passenger in place with their five-point harnesses, mounts, sliders, and generous supports. For safety, a full SAE Motorsports roll cage outlines the entire cockpit.
The Slek Designs BMW Z4 M Coupe is a razor-sharp, track-focused German sports car that looks just as good as it performs with its RSV Forged S|1 RS7M wheels.

Slek Designs BMW Z4 M Coupe w/ RSV Forged S|1 RS7M Specifications

Vehicle: 2006 BMW Z4 M Coupe
Wheels, Tires, Suspension, and Brakes:
Wheels: RSV Forged S|1 RS7M
Front Wheels: 10.5 x 19
Rear Wheels: 13.0 x 19
Tires: Nitto Invo
Front Tires: 275/30 R19
Rear Tires: 345/30 R19
Suspension: Ksport Kontrol Pro coilovers
Front Brakes: Ksport 8-piston calipers with 400 mm drilled and slotted rotors, braided stainless steel lines.
Rear Brakes: Ksport 4-piston calipers with 380 mm drilled and slotted rotors, braided stainless steel lines.
Engine:
Displacement: 3.2 liters
Number of Cylinders: Inline-six
Aspiration: VF Engineering supercharger kit, Vortech V3-Si supercharger, 8.5-9.0 PSI
Maximum Horsepower: 570
Maximum Torque: 380 lb-ft.
-Magnaflow exhaust system and tips
Exterior:
-Slek Designs full carbon fiber body kit (front and rear bumpers, extended front and rear fenders, hood, roof, doors, side skirts, rear hatch).
-PPG Deltron 4000 clear coat
Interior:
-Status Racing FIA compliant carbon fiber seats, 5-point harnesses, mounts, sliders
-SAW Motorsports roll cage
Sponsors:
-VF Engineering, Nitto Tires, Status Racing, RSV Forged, Ksport USA

Slek Designs BMW Z4 M Coupe w/ RSV Forged S|1 RS7M Gllery